Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Contributor: vite1102630China HDD MDVR
Parameter Sheet
LanguageChinese/English/Others (can be customized)
Graphical User InterfaceCan connect to external LED screen. Setup system parameters with the remote control.
Video Input4CH 720P AHD/ 4CH standard definition /2CH high definition+2CH standard definition mixed video input ,aviation plug.
Video Output1CH CVBS+ VGA output for optional, 1.0Vp-p, 75Ω, aviation plug.
Video Quality0-7 levels, 0 is the highest level, 7 is the lowest level.
Video StandardPAL: 100f/s , CCIR625 line,50field;
NTSC: 120f/s, CCIR525 line,60field;
CIF: 256Kbps ~ 1.5Mbps, 8 level video quality optional;
HD1: 600Kbps ~ 2.5Mbps, 8 level video quality optional;
D1: 800Kbps ~ 3Mbps, 8 level video quality optional;
720P: 4Mbps-6Mbps, 8 levels video quality optional
Audio Output2CH,Front port is earphone port ,rear port connects to BNC connector. The output level: 1V - 2V
CompressionG.726 compression, 8KB/s speed
Communication Interface1CH RS232, support extension device, such as POS machine, Oil Feul sensor, LED advertising screen , etc.
1CH 485 interface, can connect PTZ,etc.
8 channel mobile dvr Alarm Setup
Including: IO,Speed, Acceleration, Motion Detection, Voltage, Serial Setting and PTZ.

8 channel mobile dvr IO Alarm
Each channel alarm enable/level/time delay/Linkage information setting;

“Enable”:Alarm Trigger enable on/off and alarm type, press [OK] for changing;
“Level”:Choose Alarm trigger level,High/Low Level optional,press [OK] for optional;
“ Delay”:When alarm trigger,if need delay alarm trigger,time can be set to reduce error alarm, press [OK] for changing;
“ Record”:Record set when alarm trigger, press [OK] for changing;
“ Linkage”:Linkage set when alarm trigger, press[OK] for changing;
“Preview”:when alarm trigger the Channel will be full screen for preview,can realize Car Reversing,Door open alarm etc, Press [OK] for changing;

8 channel mobile dvr Speed Alarm
High/Low Speed or illegal driving alarm can be set.

“ Speed Source”: The method to get speed, GPS/Pulse Signal Optional, Press [OK] for changing;
“ Pulse Number”:Must set Pulse factor for the standard if using Pulse to get car speed information,press Numbers for changing,can search vehicle data or constant speed by several times setting for a certain number
“ Unit”: Driving Speed Unit,Press [OK] For Changing Setting
“Timeout Parking”\”Low Speed Alarm” \”Low Speed Warning”\”High Speed Warning” :by Enable to open or close alarm function,Level setting for alarm trigger response speed and time; Delay: alarm time ;Record: if recording when alarm appear;Linkage: When alarm occurs if linkage with alarm output.China HDD MDVR

Forum Jump:

Users browsing this thread: 1 Guest(s)